Видео

I am unable to select the facets to decimate geometry. May I know why?

I have 3 yrs experience with regular Solidworks Student and Solidworks for Makers is garbage. It took 3 days just to get started, and constantly lags.

3d Experience is shockingly bad. How to improve it. 1. Get rid of EVERYTHING nobody wants all that unnecessary crap with insanely difficult user interface , we just need the vault. 2 Create pdm in a cloud, get rid of bookmarks and enable a vault view like windows. 3. Observe people actually want to use the platform.

The quality of discourse here is unparalleled. It's like nourishment for the curious mind.🌺

Are you fucking kidding me? No offense but I'm busy and I don't have 37 minutes for this. I just wanna know what's coming.

I laughed at 1.34. as if SolidWorks could work correctly with such a chain of connections in the cable laying model))). This promotional video probably took a month to make))

it is so difficult for me to distinguish that needs needs a revolve

That's great, is there a tutorial to build this assembly and analyse? 🙏🙏

8:52 Which one is the "Open Loop <1>"?

Why are there SO many bugs in your program? Are the team leads all weak-minded? Is there anyone on the team with an IQ above 50???

I love solid workes🎉

Your number 1 subscriber for sure!

Great tips Joe!

I have to admit, Im the one spending time shuffling through folders searching for the drawing file. Because of following process in my company, the drawings are named as part number.SLDDRW, but you dont know what part it is, so parts are named differently - part number_part name.SLDPRT. Unfortunately, SW cannot work with that, so opening the drawing from model doesnt work anymore. I know you can change displayed name in the model tree, but that doesnt work well for me, sometimes the setting reverts, sometimes shows incorrect properties, etc. So nice feature, but because of not being good enough and other feature broken, makes it nice but useless feature in the end.

Спасибо, Жорик! 👍

Anything that Joe Lance shares is solid gold! This man has probably forgotten more about SOLIDWORKS than most folks will ever learn in two lifetimes! GO JOE!! 👍😀👍❌💯

I need to than one for my golf score!

why is the video not up to date with the website layout?

Really wish this video could be redone where it correctly shows the feature tree. Very frustrating when you can't actually see what's happening and can't figure out what you're doing wrong.

Not sure why, but at 3:24 I tried to drag and drop and Solidworks tells me I cannot drag it.

Thats really cool, great Tips thank you.

4:30 Lesson 9 Revolve and Sweep

4:50 Lesson 10 Loft

5:10 Lesson 11 Visualization

I got you, "The Shutter speed" concept during animation explained very well. 😅

Fix bugs in solidworks it literally crashed 2 times within 5 min this morning lmao

Wow 😍

Well done

7:54 why cant we use move face/transate/up to surface when we have zero thickness geometry

I find it more elegant to revolve the entire cone. This allows me to do the center bore in the same operation. I then negative extrude the empty space between two branches and circular pattern the negative space instead of the branch itself. This also allows me to draw the 22mm radius in the sketch and removes one fillet operation from the tree. The biggest downside to this method is that the cbore hole is not part of the circular pattern, but it still results in a more compact tree.

I hope to be part of your team

Great tips, Matt!

When I extrude cut nothing gets cut?

I need this so I can skip college and rent it out to research vessels and force them to drag me around the world with them.

Where exactly in Asia, do you have any idea about golf countries like uae if thy value these certificates?

Tell an a.i. "make me a six inch pipe two inch diameter with a 1/16th wall, and on one end affect blah blah from your desk and it builds it as you say it would be dope

This is how Solidworks makes the difference..👏

Ha! I designed one of these as team lead for my local community college as a project. We called it the Widowmaker 😅

LOL this kid has ZERO talent

If only 3d experience wasn't such an unholy nightmare to use.

Keep going ❤

ruclips.net/video/2YsW7dRsWhA/видео.htmlsi=GL3tqBuqXniTVTGG

21

Verify whigt

Cool to see xApps get all the love, while we designers are still stuck with ShitWorks so buggy, that we cannot go forward, but still too buggy, that we should have been 20 years back actually. I also love how this video completely didnt satisfy my curiosity, because I wanted to see, if these selection filters are equally as useless as in ShitWorks - If you filter for edges/vertexes etc, you still have to be pixel perfect with your aim, it just doest let you pick other entity. Not that it would actually help you pick the edge by making its hitbox larger. So I spend twenty minutes hunting for an edge which isnt even there, its 20 pixels to the side, as your graphics representation of the edges is not where the edges are :(

Very informative

hi there. I made a step file for an assembly I created in the SolidWorks, then later I lost the original file so I tried to make solid work part file from the step file by using feature works, but it only recognized a handful of features, and a lot of things didn't get recognized. In feature tree it shows as 'imported'. is there any way to recognize all the features? is there anything that I can do differently next time while creating step so that all features will be recognized?

I think a bigger change was DOS AutoCAD to Windows AutoCAD!! DraftSight worked for me because you can use LISP if you are into that. So most of my commands worked just like AutoCAD. I also took some time off from AutoCAD so that helped. Love DraftSight and I don't have a money tree so it's really helpful there.

If I design something using this software, can I sell my product or am I restricted to 3d print my product?

Can we access the tutorials after purchasing the exam??